Brass band heater overview:
Brass band heater is mainly made of brass pipe to seal the heating body, the heating body adopts imported high-temperature resistance wire and high-temperature mica plate, the lead wire adopts high-temperature resistant fiber line and copper belt wrapped wire outlet way, so that the lead wire wear-resistant and durable. The wiring of the product is connected with the heating body by copper moat and welded with silver fiber, so that the finished product is completely sealed.
The main features of the product are:
1. High temperature resistant mica plate, with high temperature resistance, good insulation performance and advanced features.
2. High temperature resistant heating wire has the characteristics of fast heat dissipation, uniform heating and high temperature resistance.
3. High quality copper material has the advantages of fast heat conduction, fast heat dissipation, high temperature resistance, temperature up to 600 degrees centigrade and no burnout.
4. Full sealing production has special effect on the injecting nozzle of the plastic injecting machine with serious leakage.
5. Long service life, can save the number of changes, improve the effectiveness of work.
6. Technical parameters: ambient temperature -20~+60 degrees Celsius, relative humidity less than 80%.
7. The leakage current is less than 0.5MA., the cold insulation resistance is >50M ohm, and the earth resistance is<10 ohm.
Others: the surface sheath is imitation rusty.
The internal heating wire adopts advanced nickel chromium wire.
Maximum power: 3w/cm2 (stainless steel), 4.5w/cm2 (brass), 6.5w/cm2 (ceramic)
The maximum temperature is above 600 degrees.